"Achieving consistent performance improvements with pinpoint accuracy while minimizing design and development time and cost has always been a key objective for us. Integrating Ansys in our workflows has helped us greatly streamline our development process with an arsenal of tools to validate almost all aspects of Motor operation before actual prototypes are tested."

"Having simulated our products since 1972 and with a wide user base of approximately 300 simulation users globally, at Grundfos we fully understand the critical importance of Simulation Driven Development in our development process. For the past five years, we have partnered with CADFEM India to further enhance our capabilities in the area of mechanical simulations. Their expertise across various areas has been integral in enabling our project success and further developing our simulation capabilities. We look forward to continuing our partnership with CADFEM India and leveraging their support for years to come as we strive to take our simulation capabilities to new heights."

“Ansys products with CADFEM support has enabled us to FastTrack functional prove out and design validation with single iteration of hardware. This has resulted in 40% faster product development lifecycle which is critical for a startup. Further, the PCB optimization done with Ansys SiWave and Q3D coupled with Icepack has resulted in high current PCBs with lower sourcing risk and part costs.”

“At Indutch Composite Technology Pvt. Ltd., we design and manufacture very large windmill turbine blade moulds, and other tooling accessories ranging from 30 m to 120 m in length. To perform FEA of such huge product requires a very robust tool like Ansys, which have been a boon to industry like us. The project development process become faster, more cost effective and innovative with the help of Ansys software and Prompt Support & training imparted to us by CADFEM team. Ansys ACP tool, which is focused on performing FEA on layered composites helped us to perform parametric study and decide optimum thickness, angle of layers, no. of layers, and composite material to be used for our products and achieve correct results.”

“We are extremely pleased with the prompt and high-quality support provided by CADFEM. Installing Ansys HFSS from CADFEM was undoubtedly the right choice for us. It has proven invaluable in enhancing our design processes for antennas, RF circuits, and RF components used in GPR and Drone Borne SAR systems. Moreover, its precise broadband responses have significantly aided us in addressing out-of-band performance considerations within our system designs. We are delighted with how closely the simulation results align with our practical measurements. Thanks to Ansys HFSS, we have been able to achieve rapid turnaround times when implementing new design iterations.”

“CADFEM has been instrumental in our journey towards achieving excellence in Computer-Aided Engineering (CAE) and product development since day one. CADFEM's unwavering support and extensive knowledge has allowed us to develop an in-house CAE function, drastically improve our FEA projects, and ultimately save valuable time and cost in our product development cycles. We have been able to streamline our product development processes, make informed design decisions, and launch our products both domestically and internationally with confidence. CADFEM's dedication to our success extended beyond the technical aspects of CAE. They were responsive, reliable, and always ready to collaborate, fostering a strong partnership between our teams. We look forward to continuing our partnership with CADFEM and are excited about the future innovations we will achieve together. I wholeheartedly recommend CADFEM to any organization seeking to enhance their CAE capabilities and accelerate their product development timelines.”

“Atomberg Technologies is a 2012 IIT Bombay Startup with our current product line of smart ceiling fans and future plans of getting into mixers, grinders, and air coolers segment. We have adopted CADFEM ANSYS solutions for our R&D to perform various CFD and structural simulations to reduce prototyping physical testing time so as to make our products efficient and faster in the market. ANSYS Multiphysics tools will help our team to predict the scenarios in the early design stage avoiding any delays in product development and it will also help our team to integrate and work collaboratively on a single platform on all physics.”

Suryudey Plastic Electronics Pvt. Ltd., a startup specializing in additive manufacturing for printed electronics, is leveraging Ansys HFSS to streamline the development of flexible antennas and wearable electronics. Ansys HFSS has been instrumental in reducing product turnaround times by from few months to 15 days by enabling virtual simulation. SPEZL commends CADFEM for their prompt and high-quality support. Partnering with CADFEM for Ansys HFSS proved to be an excellent decision for us.

Ansys simulation has helped us as budding startup to develop highly efficient and cost-optimized drivetrain solutions in e- mobility sector with the affordable startup package. The trainings and continuous support from CADFEM also enabled us to reach project delivery maturity with the tools fast after license procurement by upskilling the team in short time. Specific to the charger solution, reaching a power density of >0.75 kW/L box volume and full load efficiency of >93% for a 3.6kW capable charger was possible by effective co-simulation of Ansys Siwave, Maxwell and Icepack along with Q3D to optimize the volume without trading off power rating or EMC or Cost constraints.

"Ansys and CADFEM serve as partners and support system for Praan as it continues to embark on more and more ambitious technological projects every day. With Ansys simulation, our team has significantly reduced the development time of functional prototypes from four and a half years to 45 days and saved tens of millions of dollars. With support from Ansys Elite Channel Partner CADFEM India, Ansys solutions helped Praan develop the purifiers up to 36X faster than traditional development methods, eliminating the need for multiple, expensive physical prototypes. Furthermore, CADFEM India team has been incredibly forthcoming in helping us find new talent during the talent bubble on 2022".

“Ansys simulation has helped us develop structurally stable and thermally efficient electric vehicle chargers. The support from CADFEM India team has been absolute top notch. CADFEM India supported us in setup of advanced simulation models which helped us improve on cost, robustness and thermal stability of the charger. Ansys Multiphysics simulation solutions (Ansys Fluent, Ansys Mechanical and optislang) helped us in achieving thermal and structural optimization. It helped us cut the development time for a new charger design by 50%, while also reducing price of product development by 30% due to design optimisation and pre-compliance testing. Additionally, we saw substantial improvement on charger uptime by 6% and performance by 15%, all of which contributed to a more efficient and cost-effective process.”